RDRM25/1

Differential relay of automatic self-reclosing

Differential relay of  automatic self-reclosing


Product description

RDRM25/1 is a differential protection relay which incorporates a toroidal transformer that allows automatic reconnection of the installation in case the ground fault disappears.

This equipment has been specially designed for those public lighting applications where actions of the maintenance service to re-assemble the differential relays are frequent.

Features

  • In one sole piece of equipment, we dispose of a differential transformer and a trigger relay.
  • Automatic lighting reconnection without the necessity of actions from maintenance service.
  • If the fault continues, the relay locks itself until trying automatically again or else the next day when public lighting is switched on again.

Operating Mode

If a fault occurs, the differential relay disconnects the contactor and activates the fault led.

Then it tries to reconnect after 2 minutes, and if the leak persists, the contactor disconnects itself again. The next reconnection it will try will be after 4 min, and if the leak persists, it will then try every 6 min again. Up to a maximum of 29. After these 31 attempts, which will be after 180 minutes, if the leak still exists, the relay locks itself, leaving the contactor disconnected.

RDRM25/1 will try to reconnect after complying with one of the following conditions:

  • Pressing the Reset key.
  • Restart the lighting installation manually or automatically restart it the next day.

Technical specifications

  • Class A superimmunized.
  • Adjustable sensibility of the fault through commutator: 0.03, 0.1, 0.3, 0.5, 0.75, 1 A.
  • Adjustable delay time when detecting a fault, through commutator: 20, 100, 200, 300, 400, 500 ms.
  • Time between reconnections: 2 min, 4 min and 29 of 6 minutes.
  • Reset time of reconnections counter: 15 minutes.
  • Transformer section: 25 mm.
  • Trigger Relay 250 V/8 A (AC).
  • Test and Reset Keys.
  • Power led and led indicating fault alarm.
  • Sealable cover for commutators of pre-selection of sensibility and delay.
  • Power supply 230 VAC ±20% 50/60 Hz.
  • Working temperature: -10ºC to 50ºC.
  • DIN 46277 box for mounting in symmetrical DIN rail.
  • Dimensions 70 x 85 x 75 mm and weight of 240 gr.

Downloads

Datasheets and Brochure

  • RDRM25/1 ES

Service Instructions

Request commercial information
c/ Provença, 533 Local A - 08025 Barcelona (Spain)
Tel. (+34) 934 463 050